Eagle Computer Products: Eagle 4000TE
Connection: Andere

Eagle 4000TE
Eagle 4000TE

Eagle 4000TE with case open
Eagle 4000TE with case open

Image of Eagle 4000TE disks - 40K

Standard Specifications

Case Type: Full Tower
Processor: Sold without a processor card, or optionally with a 3rd party accelerator card they had in stock.
Chipset: AGA
Kickstarts: V3.1 (Two ROM chips)
Bus Controller: Super Buster Rev 11
Expansion Slots: 5 x 100pin Zorro III slots
2 x AGA Video Slots (both inline with Zorro slots)
4 x Inactive 16bit ISA slots (3 inline with Zorro slots)
1 x 200pin CPU Fast Slot
Standard CHIP RAM: 2MB (Surface Mounted)
RAM sockets: 4 x 72pin SIMM slots
Hard Drive Controllers: 1 x 3.5" IDE Controller
1 x SCSI-II Controller
Drive Bays: 6 x 5.25" (6 with faceplates)
5 x 3.5" (2 with faceplates)
Expansion Ports: 1 x 25pin Serial
1 x 25pin Parallel
1 x 23pin RGB Video
2 x 9pin Joystick/Mouse
2 x RCA Audio (Left/Right)
1 x 3.5mm Headphone
1 x 50pin External SCSI
1 x RCA Composite
1 x 5pin DIN Keyboard
Floppy Drive: 1 x Internal 880K (Actually a PC 1.44MB drive converted for Amiga use)
Motherboard Revisions: Rev 4
Battery Backed Up Clock: Yes (Coin shaped lithium battery). Two terminals are also available for attaching an external battery

The Eagle 4000TE is simply a licensed A4000T clone manufactured by Eagle. The case design is different, however it uses the same motherboard as the Amiga Technologies and Commodore A4000Ts. For additional information please see the Commodore A4000T, or Amiga Technologies A4000T.

Contributions to this page by:
Mauro Maltoni, P-O Yliniemi


Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site