PPS (Progressive Peripherals & Software): Framegrabber PAL/NTSC
Connection: Paralleler Port, Video Sockel (Amiga 23pin)

ppsframegrabber_1_sm.jpg

ppsframegrabber_2_sm.jpg

Hi Res Version of Front - 61K
Hi Res Version of Back - 70K
Image of the PSU - 93K
Image of the PSU Plate - 31K
Image of the PSU Connector - 7K

The Framegrabber is a real-time colour video digitizer capable of capturing 30 frames/sec in 4096 colours. It is available in both PAL and NTSC versions and is capable of digitizing at 320 x 200 or 640 x 400 including overscan. It connects to both the parallel port and the Amiga's monitor port. The monitor in turn is then connected to the framegrabber. This allows the framegrabber to be operated using one monitor to switch between the video source and the Amiga's video. The unit contains controls to alter the hue, saturation and intensity of the video.

Contributions to this page by:
Iggy Drougge, Takahasi Kasiko


Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site