Rombo: Vidi Amiga-12RT
Connection: Paralleler Port

vidiamiga12rt_1.jpg

vidiamiga12rt_2.jpg

vidiamiga12rt_3.jpg

Hi Res Version, Image 1 - 110K
Hi Res Version, Image 2 - 122K
Hi Res Version, Image 3 - 746K

The Vidi Amiga 12RT is a 24bit video digitizer which plugs into the parallel port of the Amiga. It is capable of capturing video in realtime from either a PAL or NTSC source including SVHS. It is similar to the Vidi-Amiga 12 and Vidi-Amiga 12SV. It is possible to upgrade the Vidi Amiga 12-RT to the 2MB or RAM, this service was normally provided by Rombo. A power supply was not provided with the device, however it is recommended you use an additional power supply because the Amiga may not be able to supply enough power. A DC 9V 500m A 2.1mm power supply is required with the centre contact being positive.

Capture Resolution: 360x576 (PAL), 360x476 (NTSC)
Colour Resolution: 24bit 2:0.5:0.5 YUV

Contributions to this page by:
Anthony Barbati, Dr Dude, Takahasi Kasiko


Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site