BSC: Tandem
Connection: Zorro II

tandem_big.jpg

tandembox_1_sm.jpg

tandembox_2_sm.jpg

Hi Res Version, Image 2 - 230K
Hi Res Version, Image 3 - 162K

A half length Zorro II card which provides a 3.5" IDE controller and a Mitsumi Controller. This card supports any IDE device and ATAPI device connected to its IDE controller. It uses (oktagon.device) for IDE devices and (tandemat.device) for ATAPI devices. The Mitsumi controller is actually a custom controller based on IDE made by Mitsumi. These controllers are normally found on PC sound cards and allowed a way of adding a CDROM without wasting any IDE ports. Only CDROMs of the Mitsumi type can be used on the Mitsumi controller. They use tandemcd.device. Please note that Mitsumi also make IDE CDROMs, so the CDROM you use must support the Mitsumi controller standard, not just be branded by Mitsumi.

Contributions to this page by:
Arthur Yau, Robert Williams


Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site