Commodore: A520
Connection: Video Sockel (Amiga 23pin)

a520_1_sm.jpg

a520_2_sm.jpg

Picture showing the top of the device
Picture showing the top of the device

Picture showing the bottom of the device
Picture showing the bottom of the device

Picture showing the back of the device
Picture showing the back of the device

Picture showing the side of the device
Picture showing the side of the device

Hi Res Version, Image 1 - 372K
Hi Res Version, Image 2 - 359K
Hi Res Version of Top - 60K
Hi Res Version of Bottom - 73K
Hi Res Version of Side - 39K
Hi Res Version of Back - 28K
Image of Manual - 15K
Image of Box - 27K

The A520 was a TV modulator that was generally supplied with the A500 series of machines but can be used with almost any Amiga. It converts the RGB port for use with a TV by supplying an RF (aerial lead) connector. The two audio outputs were also attached the modulator for sending the audio signals down the RF lead. The L H switch is for switching between two slightly different frequencies in case it was causing or receiving interference from another device such as a VCR.

Contributions to this page by:
Dagfinn Olsen, RiWa & Friends


Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site