|Village Tronic: Ariadne|
|Connection: Zorro II|
Rev 1.2 version
Hi Res Version - 693K
|10Base2 (BNC & Coax, ThinNet):||Yes|
|10Base5 (AUI & Coax, ThickNet):||No|
|10BaseT (RJ45 & UTP):||Yes|
|100BaseTX (RJ45 & UTP):||No|
|SANA-II Driver:||Yes (ariadne.device and liana.device)|
|MNI Driver:||Yes (z2-am7990.mni)|
The Ariadne is a full length Zorro II card with 32 Kbytes of buffer RAM on board and also an option for a boot EPROM. The Ariadne also includes two parallel ports, which are exactly the same as those found on the A4000. A SANA-II driver called Liana is also supplied for use with the parallel ports, as well as a parnet driver. There may also be a driver supplied for use with Amix, but this has not been confirmed.
| Parallel Port 2 1234 1 _____ |___
| ############ OOOO ::: | | |
| JP1 .. 1 LEDs LED |EPROM| |#
| Boot Connector| | |# DB25
| | | |# Parallel
| |_____| |# Port 1
| #| RJ45
| #| 10BASE-T
| |_| BNC
||||||||||||||||||||||||||| | Jumpers
JP1: Enable Boot ROM?
Off: Set to disable autobooting (default).
On: Set to enable autobooting from an on-board EPROM.
|1||LED 1, Twisted pair MAU link status|
|2||LED 2, Transmit Status|
|4||LED 3, Collision|
|6||LED 4, Receive Status|
|Contributions to this page by:
Greg Scott (National Amiga), RiWa & Friends
Einem link gefolgt? Hier gehts zur Hauptseite
Followed a link? Please go to the Main Site