Zeus Electronic Developments: Connexion
Connection: Zorro II

connexion.jpg

Connexion V1.0
Connexion V1.0

Closeup of Connexion - 2179K

TypeEthernet
10Base2 (BNC & Coax, ThinNet): Yes
10Base5 (AUI & Coax, ThickNet): Yes
10BaseT (RJ45 & UTP): No
100BaseTX (RJ45 & UTP): No
SANA-II Driver: Yes (also compatible with A2065 SANA-II drivers)
MNI Driver: Yes (z2-am7990.mni) (Card must be configured for A2065 mode)
Other Driver: Yes (100% compatible with the A2065)

This card was basically a Commodore A2065 clone which had a slightly newer revision of the AMD chipset. There is actually a jumper on the card which could be used to switch between Commodore 2065 mode and native mode. The card could use the same SANA II device driver which was used for the 2065 with a newer version of the driver being written by Heinz Wrobel for increased performance and compatibility. The card has two network connectors, BNC and AUI and LEDs which showing the network status.

Contributions to this page by:
Frank Zündorff, RiWa & Friends


Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site